A SERVICE OF

logo

Open as PDF
next previous
6
Catalyst 6500 Series PFC3B and PFC3BXL Installation Note
78-16220-02
Removing the PFC3A from the Supervisor Engine 720
Figure 1 Removing Securing Screws and Cap Nuts
Caution Use care not to damage the connectors on the supervisor engine. If you damage a connector, you will
have to return the supervisor engine to Cisco for repair.
Step 2 Hold the right edge of the PFC3A with your right hand and the rear left corner with your left hand.
(See Figure 2.) Gently lift the PFC3A with both hands simultaneously and remove the PFC3A from
the Supervisor Engine 720.
105311