A SERVICE OF

logo

Open as PDF
next previous
Appendix
LED-PAR200B User Manual 10 2010-03-09/15:03
DMX Channel Values
NOTE! Please read all instructions carefully on fixture DMX control mode and addressing.
DMX channels 2, 3, 4, 5 and 6 functions are determined by the current settings of channel 1. For
example, while Channel 1 is set between 000 and 029 the following conditions will apply;
Channel 2 will control the Red LEDs
Channel 3 will control the Green LEDs
Channel 4 will control the Blue LEDs
Channel 5 will control Strobing
Channel 6 will control the Dimmer
CHANNEL
VALUE
FUNCTION
CH 2
CH 3
CH 4
CH 5
CH 6
1
000 029
RGB Control Mode
Red
000 255
Green
000 255
Blue
000 255
Strobe
000 020 No Strobe
021 255 SlowFast
Dimmer
000 255
030 059
060 089
090 119
Pulse Strobe
Pulse ( 0 <-> 100% )
Pulse ( 100 <-> 0% )
Pulse ( 100 <->0% <->100)
No
Function
No
Function
No
Function
Speed
000 255
120 149
Color Macro
Color Macros
See Table 1.1
No
Function
150 179
R,G,B Chase
RGB Chase pattern
No
Function
Speed
000 255
180 209
Automatic
Color change
210 239
Automatic (Fade)
Color Change w fade
240 255
Sound Activated
Music/Auto switch must be set
to music
No
Function
Table 1.1
MODE
CH 2
DESCRIPTION
Color
Macro
Ch 1
120 149
000 016
Red
017 056
Red ( Full )
Green: ( 0% ~ 100% )
057 094
Green (Full
Red: ( 100% ~ 0% )
095 096
Green
097 136
Green ( Full )
Blue: ( 0% ~ 100% )
137 174
Blue ( Full )
Green: ( 100% ~ 0% )
175 176
Blue
177 216
Blue ( Full )
Red: ( 0% ~ 100% )
217 255
Blue ( Full )
Red ( Full )
Green: ( 0% ~ 100% )
Music/Auto Switch
Note! Regardless of DMX controller
operated use, when the
LED-PAR200B is set to run in Sound
Activated mode, you should make
sure that all units are properly
switched to Music and that you have
adjusted the rotary dial to optimize the
sound level response of the unit.
SWITCH
ROTARY FUNCTION
AUTO
Adjusts speed of built in
program
MUSIC
Adjusts sound sensitivity of
built in microphone.