A SERVICE OF

logo

Assembly: Requires 2 people. Get another person to help.
Tools Needed
: Pliers, Phillips Head Screwdriver and a 7/16” Nut Driver.
NOTE
: Do Not tighten any bolts unless instructed to do so. Tightening too soon may prohibit
parts from fitting together. All Hex Nuts should be on the inside of the grill unless stated
parts
from
fitting
together.
All
Hex
Nuts
should
be
on
the
inside
of
the
grill
unless
stated
otherwise. Unpack all contents in a well cleared and padded area.
Estimated Assembly Time: 45 minutes
STOP! Do Not Return to Store. If you are missing parts or need assistance please email us at
info@chargriller.com or call 912-638-4724. Do not attempt assembly if you are missing parts.
HARDWARE:
¼-20x 1 ½” BOLT……8 PCS
HARDWARE:
¼-20x1/2” BOLT….... 43 PCS
SCREW……………….3 PCS
¼” FLAT WASHER…10 PCS
¼
-
20 HEX NUT 19
PCS
¼
-
20
HEX
NUT
……..
19
PCS
¼” LOCK WASHER…35 PCS
HINGE PINS………..2 PCS
HAIR COTTER PIN….3 PCS
page 9
CENTER HINGE PIN…1 PC
™ & © 2006 Char-Griller / A&J Mfg.