Page 2SKU 96147
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Capacity 20 Ton Maximum
Height
10-3/8” Minimum
20-1/4” Maximum (with screw extended)
Ram 2.12” Diameter x 6-1/2” travel
Air Inlet Fitting 1/4” NPT
Weight 37 Pounds
Base Dimensions 9-7/8” L x 6-1/2” W
Air Hose 3/8” x 46-1/8” L with crimped hose fittings
Air Pressure 70 - 150 PSI
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
Read all instructions before using this tool.
Do not overload this equipment. Know the weight of the item being lifted.
Use Jack for lifting only. Do not use this equipment for any other purpose. Immedi-
ately after lifting, support the load with appropriate supporting equipment.
Place Jack correctly. Only use this equipment on a surface that is stable, level, clean
and dry, and capable of sustaining the load.
Stabilize load. Ensure that the load remains stable at all times. Do not attempt to shift
a load while it is on the Jack.
When lifting a vehicle, apply the emergency brake, and block all wheels.
Do not work under a load while it is being supported by the Jack.
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Do not expose to rain. Keep work area well lit.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines or tools.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
REV 07i
