3
3-26 Managing Print Jobs
Jobs are transferred from the source server to the same area on the target
server (from Spool to Spool, from RIP to RIP).
NOTE: You cannot perform any other Command WorkStation functions
while files are being transferred between servers.
4. After verifying that the jobs were successfully transferred, you can delete
them from the originating server, if you wish.
Archiving jobs
PostScript and raster data jobs can be archived internally to the iR C2100/
2100S hard disk, or externally to the Command WorkStation hard disk or
network drives.
TO ARCHIVE A POSTSCRIPT OR RASTER JOB:
1. In the Queues window, select any held job in the Spool or RIP areas.
2. Choose Archive from the Job menu.
3. To archive the job(s) internally to the iR C2100/2100S hard disk, click OK.
The job(s) are archived internally.
4. To archive the job(s) externally to the Command WorkStation hard disk or to
a device on the network, click Add.
Click to add a device
