A SERVICE OF

logo

52 en | Configuration Using a Web Browser VideoJet X20
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
Audio
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data are encoded according to G.711 and require an additional
bandwidth of approx. 80 kbps for each connection. If you do not want any audio data to be
transmitted, select Off.
Line In
You can set the audio signal gain for the line inputs. Make sure that the display does not go
beyond the green zone during modulation.
Line Out
You can set the line output gain. Make sure that the display does not go beyond the green
zone during modulation.
Selection
Click one of the option boxes and then click Set to display the level of the respective audio
input for orientation and to set the gain.