A SERVICE OF

logo

28 en | Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts AutoDome 800 Series HD PTZ Camera
F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Figure 2.13 Pendant Arm Cables
1. Route all incoming wires through one of the conduits at the bottom of the Mounting
Plate. For a mast mount, route all wires through the right-angle conduit.
2. Attach the water-tight plug to the other conduit.
3. Attach the grounding spade terminal (item 1, below) to one of the spade terminals inside
the Mounting Plate.
Cable Cable Cable Cable
1 Grounding Strap (black) 5 Ethernet Video and Control (blue)
2 24 VAC Power (red) 6 Alarm Outputs (white)
3 Relay Contacts (yellow)
(not used)
7 Alarm Inputs (gray)
4 Coax Video (black)
(not used)
8Audio In (green)