Indoor Minidome Wall and Pipe Mounts Installation | en 5
Bosch Security Systems Installation manual AM18-Q0631 | v1.0 | 2012.08
3 Installation
This installation should be made by qualified service personnel and conform to the National
Electrical Code and applicable local codes.
3.1 Installing the Wall Mount
Figure 3.1 Wall Mount installation
1. Determine location for wall mount.
2. Use mount as template to mark location of mount holes on walls.
3. Drill holes for anchors and install anchors into wall.
4. Drill fifth hole into wall and center this hole to align with feed-through tube in mount.
5. Use this hole to pull wires through feed-through tube.
6. Assemble mount to wall.
7. Connect all wires to camera.
8. Pull any excess wire back into mount tube.
9. Assemble camera to mount and fix with three (3) M5 screws (supplied).
10. Install camera dome housing cover.
