A SERVICE OF

logo

Routing incoming intercom calls
If the call is a request from a user to speak to another user, you must call up
the main window in order to route and connect the call. To do so:
Click on the ‘Connect To...’ push button.
The ‘Connect Request’ dialogue box disappears and the following dialogue
box appears:
Fig. 2 The ‘Intercom’ dialogue box
NOTE: The ‘Connect Request’ window also disappears if the caller or the
operator hangs up.
The field below the ‘Call From’ text identifies the caller.
Digital Congress Network Intercom
Page 4-3 Software User Manual
INTERCOM ACTIVITY DURING A CONFERENCE
4