108n
Hardtop* – roadster
The fabric top does not have to be re-
moved even in winter, when the hardtop
is normally in constant use. In order to
prevent water spots and mildew stains,
the fabric top must be completely dry
before it is stored in the convertible top
well.
Two people are necessary for the in-
stallation and removal of the hardtop.
Work with extreme caution during this
operation to avoid paint damage and
damage to the body and hardtop.
You may purchase a Hardtop Lift
* from
your BMW center. This accessory is
especially designed to facilitate installa-
tion and removal of the hardtop.
Installation
Hook the protective fabric on the con-
vertible top linkage (arrow).
Open the convertible top and fold it
down in the convertible top well. Refer
to pages 41 and 45.
When doing this, make sure the rear
window is laid down evenly and free
of creases. To prevent the rear window
from being scratched, position the pro-
tective fabric in the window fold.
Do not install the convertible cover.
Lower the side windows and remove
the rod antenna if necessary to avoid
damage.
367de384
Rotate the cover panel which is located
in the right and left trim panels behind
the seats in the direction of the arrow
until the opening for the hardtop mount
is completely free.
Remove the hardtop from the protec-
tive cover. Clean any dirt and dust from
the contact surfaces between the hard-
top and the vehicle body in order to
protect against abrasion.
Position the hardtop on the mounts with
the assistance of a second person.
Online Edition for Part-No. 01 41 0 155 149 - © 08/99 BMW AG
