724-746-5500 | blackbox.com
Page 18
Chapter 5: Operation
Table 5-1. LED functions.
Name Status Description
PWR
ON Power to the unit is ON.
OFF Power to the unit is OFF.
FX
LFP
ON
The Link Fault Passthrough (LFP) function
is enabled.
OFF
The Link Fault Passthrough (LFP) function
is disabled.
Link/Act
ON There is a valid link.
Flashing
The converter is receiving or transmitting
data from the fiberoptic connector.
OFF There is no valid link.
TP
SPD
ON
The TP port is connected to
100BASE-TX.
OFF
The TP port is connected to 10BASE-T or
is not connected.
FDX/Col
ON
The TP port is operating in full-duplex
mode.
Flashing There is a collision.
OFF
The TP port is operating in half-duplex
mode.
Link/Act
ON There is a valid link.
Flashing
The converter is receiving or transmitting
data from the TP port.
OFF There is no connection on the port.
