The Site Survey Screen
Clicking on the Site Survey radio button will display a list of all available access points in your area. The following
information about each is displayed:
(a) BSSID – The MAC address of the access point
(b) SSID – The Service Set Identifier (wireless network name) of the access point.
(c) Channel number – The current operating channel of the access point
(d) Encryption – Will display “No” when encryption is disabled, 64-bit when 64-bit encryption is enabled and 128-bit
when 128-bit encryption is enabled.
(e) Signal Strength – The signal strength of the related access point. This is a “snap-shot” of the signal strength at the
time of the site survey. Pressing the “Rescan” (g) button may get a different result.
(f) BSS – Displays the mode that the access point is operating in: Infrastructure or AD-Hoc
(g) Rescan – Rescans for available wireless access point and wireless routers.
(h) Connect – Double click on a BSSID (a) and click Connect (h) to select an available wireless access point or wireless
router.
TIP-> Double-clicking on the BSSID and clicking Connect (h) of an access point will make the Adapter join that particular
network. To check the area for more access points, click “ReScan”.
c
b
a
d
e
g
f
h
