2
PREPARATION
BEFORE USE
1. Verify that the product and the application are compatible, if in doubt call Atd Tools Technical Service
(636)272-9050.
2. Before using this product, read the owner’s manual completely and familiarize yourself thoroughly with the product,
its components and recognize the hazards associated with its use.
3.Replace worn or damaged parts and assemblies with Authorized Replacement Parts only. (See Replacement
Parts Section).
SAFETY and GENERAL INFORMATION
Save these instructions. siht no dna htiw dedivorp noitamrofni eht wollof dna ,dnatsrednu ,daer ,ytefas ruoy roF
portable air tank before using. The owner and operator of this equipment shall have an understanding of this portable
air tank and safe operating procedures before attempting to use. The owner and operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be
conveyed in the operator's native language before use of this product is authorized. If any doubt exists as to the
safe and proper use of this portable air tank, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any portable air tank
that appears damaged in any way, or operates abnormally shall be removed from service immediately. If the portable
air tank has been dropped or impacted suddenly, unexpectedly, immediately discontinue use until product has been
checked by a factory authorized service center (contact distributor or manufacturer for list of authorized service
centers). It is recommended that an annual inspection be done by qualified personnel. Labels and Operator's Manuals
are available from manufacturer.
PRODUCT DESCRIPTION
Atd Tools Portable Air Tanks are designed to contain air pressure up to 125 psi.
These portable air tanks are designed for one purpose: to supply compressed air for use in inflating tires,
sport balls, inflatables.
Check with your inflatable product’s owner’s manual for proper inflation pressures.
!
This air contained within this tank can not be made breathable! NEVER rely on this portable air tank as a
source of breathable air.
!
RISK OF BURSTING - This portable air tank does not meet the safety & performance guidelines of the
ASME Pressure Vessel Code. NEVER use past the discard date stamped into the bottom of tank.
Do not exceed rated pressure of 125 psi. Fill only from low pressure compressor systems whose pressure is
no greater than 150 psi.
Figure 1 - Typical Air Tank Nomenclature
Reservoir
Air Chuck
Air Pressure Gauge
Air Inlet
Manifold
Air Valve Knob
Air Hose
