43-EN
• MiniTuner missing/disconnected or no communication between
the unit and XM Radio.
-Check the XM Tuner.
• The XM or SIRIUS antenna is not connected to the XM or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable is attached
securely to the XM or SIRIUS radio module.
• The Receiver is updating the SIRIUS channel line up. During
update, audio will be muted until update is completed.
- Wait until the channel update is completed. After completion,
the unit automatically re-tune to previous channel.
• Radio’s firmware is being updated. During firmware update,
audio will be muted until update is completed.
- Wait until the update is completed. After completion,
automatically re-tune to previous channel.
• The subscribed program is being updated. During update, audio
will be muted until update is completed.
- Wait until the update is completed. After completion, follow
the indication “SUB UPDT” to press any key on the unit to
continue, the unit re-tune to previous channel.
• XM or SIRIUS signal is too weak at the current location.
- Wait until the boat reaches a location with a stronger signal.
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
• The channel currently selected has stopped broadcasting.
- Select another channel.
• The user has selected a channel number that does not exist.
- The unit will revert back to the previously selected channel.
• The user has selected a channel number that does authorized.
- The unit will revert to the previous selected channel or to
channel 1 automatically.
Indication for SAT Receiver Mode
(SIRIUS mode)
(SIRIUS mode)
(Blink) (SIRIUS mode)
(SIRIUS mode)
(XM mode)
(XM mode)
(XM mode)
(SIRIUS mode)
(XM mode)
(XM mode)
(XM mode)
