CONNECTING SPEAKERS @)
Front speakers
——.
Smsalw terminals
(
C&nect front speakers (system A andlor B), a center speaker,
surround speakers and sub woofer to the corresponding speaker
terminals on the unit:
- the frc,nt speaker cords to the FRONT SPEAKERS terminals
- the center speaker cord to the CENTER SPEAKER terminals
- the surround speaker cords to the SURROUND SPEAKERS
terminals.
- for more powerful bass, the sub woofer (with a built-in amplifier)
cord to the SUPER WOOFER XI jack
Speaker impedance
For all speakers, use speakers of 8 ohms or more.
Connecting + to +, -to - terminals
To get the proper sound effect, the speaker terminals on the unit
and the speaker should be connected with proper polarity; the +
terminal on the unit should be connected to the + terminal on
the speiaker (and -to -).
● Be sul’e to connect the speaker cords correctly as shown in
the illustration on the right column. Improper connections can
cause short circuits in the SPEAKER(S) terminals.
● Do not leave objects generating magnetism near the speakers.
Lift up the “terminal flap,
insert the speaker corc~lead
into the terminal slot, then
close the flap. Check that the
cord is connected securely.
Surround speakers
@@mwmxm@@@@@
/
——
~.
Sub woofer
—.
nter speaker
ENGLISH
‘4
