3,7,8,9
5
4
2
■
In the F’rogrammed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape as the tracks are programmed.
1
2
3
4
Insert the tape into Deck 1.
Insert the tape with the side to be recorded on first facing out
from the unit, and wind up the tape with -.
Press CD and load the disc(s).
Press EDIT/CIHECK twice.
“ED1-~ and “PRGM” are displayed.
● When “Al” is dispiayed, press EDIT/CHECK again.
Press numbered buttons on the remote control
to designate the tape length.
10 to 99 minutes can be specified.
● *I, * or MULTI JOG are also available to designate
the tape length.
Tape side A Maximum recording
Tape length
(front side)
time for side A
5 Press DIRECr, then press one of the numbered
buttons 1 to U within 3 seconds to select a disc.
Then, press numbered buttons O-9 and +10 on
the remote ccmtrol to program a track.
Example: To select the 10th track of disc 2, press DIRECT
and :2,then pres:s +10 and O.
Selected disc
number
Program number
Remaining time on side A
6
7
8
9
Repeat step 5 for the rest of the tracks for side c1
A.
A track whose playing time is longer than the remaining time
“:f:”’
cannot be programmed.
;#j”
Press EDIT/CHECK to select side B and program ‘,x’
the tracks for side B.
w
Tape side B (reverse side)
Press EDIT/CHECK to select side A and press
● on Deck 1.
~
flashes for 10seconds, and then CD play and recording
of edited tracks for the first side start simultaneously. When
the end of the tape is reached, Deck 1 enters the recording
stop mode. After entering the recordings top mode, go to
step 9.
Press EDIT/CHECK for recording of the second
side.
“B” is displayed.
10 Turn over the tape in Deck 1 and press ● to start
recording.
Recording starts.
To stop recording
Press W= on Deck 1. Recording and CD play stop
simultaneously.
❑
To check the order of the programmed track numbers
Before recording, press EDITICHECK on the remote control to
select side A or B, and press ++ or > repeatedly.
Disc number
Program number
I
Track number
Programmed track numbers
To change the program of each side
Press EDIT/CHECK on the remote controlto select sideA or B,
and press WCLEAR to clear the program on the selected side.
Then program tracks again.
To clear the edit program
Press
■CLEAR twice in stop mode so that “EDIT disappears
on the display.
m
Up to 30 tracks can be programmed from any of the inserted
discs.
Selected track number
Programmed track number
ENGLISH 14
