Operating instructions
35
Emergency release for fill-in door
If the fill-in door can no longer be opened (e.g. due to a defective door
release or power failure during the washing program), it can be opened
with the help of the emergency release.
0 1. If water can be seen at the window in the fill-in door, perform emer-
gency draining first (see "Perform emergency drain").
2. Turn the knob in an anti-clockwise direction
with the aid of a coin or with a screwdriver.
The door springs open.
Additional rinse and/or water cooling
The washing machine is adjusted for extremely economical water
usage.
• For people who suffer from an allergy to detergents, it can be useful
to rinse with more water (additional rinse).
• It may be necessary to cool the wash-water before it is pumped out,
in order to prevent damage to plastic drain pipes (wash-water cool-
ing).
3
The program duration and water consumption are increased by water
cooling and/or the additional rinse.
Additional rinse
3
If this function is enabled, an additional rinse in performed for the pro-
grams t (COTTONS/LINEN), } (EASY-CARES) and
à (DELICATES).
As supplied from the factory, the additional rinse function is not ena-
bled.
Enabling the additional rinse function:
0 1. Turn the program selector to F (SHORT SPIN).
2. Press the q (SOAKING) button for at least 5 seconds.
After the button has been kept pressed for 5 seconds, + Á
(Rinse
+) flashes on the program progress indicator for 5 seconds.
Rotating knob
