© Adam Equipment Company 2011
16
3.11 REAL TIME CLOCK SETUP
The Real Time Clock (RTC) is used only for the RS-232 output. The Date
and Time can be set as required. The scale will keep the clock running even
when the power is off.
Setting up the clock
• Press and hold the [CE] key when power is first turned on, release the
key when the revision is displayed. The displays show the current date
and time set.
“ rtC “ “11,14,06” “16,41,35”
• Press the [CE] key to change the date and time. The display will show
the current time format, “H-m-S”.
• Enter the time using the numeric keys using a 24 hour clock format,
3:41PM is “154100”.
• Press the [Tare] key to accept the time. The display will show the
current date format.
• Press the [Print] key to change the date format. Available formats are:
“Y-m-d” year, month, day
“m-d-Y” month, day, year
“d-m-Y” day, month, year
• Press the [Tare] key to accept the chosen format and then enter the
date in this format.
• Press the [Tare] key to accept the date.
An error code will be shown if the time (Err 1) or the date (Err 2) is not the
permissible values. For example, 34
th
day of a month is an invalid entry.
