A SERVICE OF

logo

Open as PDF
next previous
23
... English
User Controls
Rear-Ceiling
Whenyouselectthisfunction,theprojectorreverses
and turns the image upside down at same time. You can
project from behind a translucent screen with ceiling
mounted projection.
H. Position (Horizontal Position)
Press the to move the image left.
Press the to move the image right.
V. Position (Vertical Position)
Press the to move the image down.
Press the to move the image up.
Frequency
“Frequency”changes the display data frequency to match the
frequency of your computer’s graphic card. If you experience a
verticalflickeringbar,usethisfunctiontomakeanadjustment.
Tracking
“Tracking” synchronizes the signal timing of the display with the
graphiccard.Ifyouexperienceanunstableorflickeringimage,use
this function to correct it.
Sharpness
Adjusts the sharpness of the image.
Press the to decrease the sharpness.
Press the to increase the sharpness.
Signal Type
Press the or buttontochangesourcetoRGB,
YPbPr or YCbCr.
“H.Position”,“V.
Position”,“Frequency”
and “ Tracking” func
-
tions are supported
under Computer mode
only.
“Sharpness”,“Signal
Type” functions are
supportedunderVideo
mode only.
Image
(Computer / Video
Mode)