A SERVICE OF

logo

69
Installing an expansion card
This section explains how to install an expansion card. The onboard
expansion slots supports PCI (Peripheral Component Interconnect) and
PCI-X cards.
To install an expansion card
1 Observe the ESD precautions and pre-installation instructions
described on page 33.
2 Locate an empty expansion slot on the mainboard.
Note: The SCSI RAID controller shown below is for your reference
only. To purchase a SCSI RAID controller, contact your local Acer
representative or order directly from
http://www.acer.com/
.
3 Press the slot release latch outward (1).
4 Pull out the slot cover (2). Store it for reassembly later.
5 Remove the expansion card from its protective packaging.
6 Align the card in the empty slot.
7 Insert the card into the selected slot (3). Make sure that the card is
properly seated.