A SERVICE OF

logo

39
The Award BIOS utility is a hardware configuration program
built into your system’s Basic Input/Output System (BIOS). It
supports a jumper-less design that automatically detects the
CPU voltage and frequency.
If you made some changes in the CMOS settings (BIOS) and
your system fails to boot, do the following:
1.
Hold down the
HOME
key while you reboot your
system.
2.
When the system boots up, enter Setup by pressing
Ctrl-
Alt-Esc
. The BIOS Setup main menu appears.
3.
Choose
Load Setup Defaults
to undo the changes you
made and set the BIOS setup parameters to their original
settings.
Ap8400-e.book Page 39 Friday, October 1, 1999 2:20 PM