53
English
• During the POST, press F2 to access the BIOS Utility and verify that
the infrared port is enabled.
• Make sure both devices are IrDA-compliant.
The printer does not work.
Check the following:
• Make sure that the printer is connected to a power outlet and that
it is turned on.
• Make sure that the printer cable is connected securely to the
computer’s USB port and the corresponding port on the printer.
• During POST, press F2 to access the BIOS Utility and verify that the
USB port is enabled.
I want to set up my location to use the internal modem.
To properly use your communications software (e.g. HyperTerminal),
you need to set up your location:
1 Click on Start, Settings, Control Panel.
2 Double-click on Modems.
3 Click on Dialing Properties and begin setting up your location.
Refer to the Windows manual.
