![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/a/81/a81945e0-8902-4add-b3eb-cddde52cc68a/a81945e0-8902-4add-b3eb-cddde52cc68a-bg37.png)
Fast SwitcHub-2se User’s Guide
Glossary 3
MDI-X Port (Medium Dependent Interface - Crossed)
This RJ-45 port, which crosses the receive and transmit signals internally, can be used
with straight-through cable to connect the switch to any workstation or server that has a
properly installed network adapter card. Pin-out assignments are shown in Appendix B.
RJ-45 Connector
Most common terminator for twisted-pair wiring.
Shielded Twisted-Pair (STP)
Twisted-pair wire covered with an external aluminum-foil or woven-copper shield
designed to reduce excessive noise pick up or radiation.
Station Port
The SwitcHub MDI-X port or the fiber optic port can be used for connecting the switch
to any workstation or server that has a properly installed network adapter card.
Unshielded Twisted-Pair (UTP)
Cable composed of two insulated wires twisted together to reduce electrical
interference; used in common telephone cord.