A SERVICE OF

logo

Open as PDF
next previous
Setting the Port Network Connection Type
71
Setting the Port
Network
Connection Type
You can set the network connection type for a specified port or a group
of ports. To do this, you can use either the LMA or the integrated fast
setup. If you want to use the fast setup, see the
CoreBuilder 9000 ATM
Interface Module Getting Started Guide
. You can set the interface type to
NNI, UNI, or PNNI.
Display Network Connection Type
Update Port Network Connection Type
Reset NNI Configuration
Reset All
Reset All Except IP Addresses
PNNI is a feature available only in the extended software version. For
details on obtaining the extended version, contact your 3Com
representative.