Filter
Top Products
16
PROGRAMMING THE SOUND BAR
You can program your Sound Bar to accept TV remote IR commands. Press the MENU button on the remote, then use the Up/Down
buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn Vol +, and Learn Mute.
INPUT MENU
VIZIO
Ensure that both the Sound
Bar and TV remotes are
pointed at the front of the
Sound Bar.
TV Remote
Function LED Behavior Description
Learn Volume
Down
(Waiting to learn)
Flash from
Left to Right
and back
continuously.
All of the LEDs
will blink twice to
confirm.
Press the Play button to put the Sound Bar into learning mode.
While the Sound Bar is in learning mode, press the Volume
Down button on the TV remote control. All of the LED Indicators
on the Sound Bar will flash two times indicating that it has
successfully recognized the TV remote.
Learn Volume
Up
Press the Play button to put the Sound Bar into learning mode.
While the Sound Bar is in learning mode, press the Volume Up
button on the TV remote control. All of the LED Indicators on the
Sound Bar will flash two times indicating that it has successfully
recognized the TV remote.
Learn Mute
Press the Play button to put the Sound Bar into learning mode.
While the Sound Bar is in learning mode, press the Mute button
on the TV remote control. All of the LED Indicators on the Sound
Bar will flash two times indicating that it has successfully
recognized the TV remote.
Learn Vol -
Learn Vol +
Learn Mute
When programming your
Sound Bar, turn off your TV
speakers.