Filter
Top Products
VIZIO 120HZ E SERIES User Manual
Version 3/17/2010 36
www.VIZIO.com
The following paragraphs describe in detail the differences of the Aspect Ratio being processed by the
TV:
Normal Mode
The original 4:3 aspect ratio (1.33:1 source) is preserved, so black
bars are added to the left and right of the display image. Standard TV
broadcasts are displayed with a 4:3 Aspect Ratio. Movies in 4:3
Aspect Ratio may be referred to as pan-and-scan or full frame.
Wide Mode
When watching a standard broadcast or full-frame movie in
this mode, the display image is stretched proportionately to
fill the TV screen. When watching a widescreen (1.78:1
source) program or movie, the display image fills the TV
screen. If you are watching a widescreen (1.85:1 or 2.35:1
source) program or movie, there will still be black bars at the
top and bottom of the screen.
Zoom Mode
When watching a widescreen (1.78:1, 1.85:1, or 2.35:1
source) program or movie, the display image is zoomed
proportionally to fill the width of the screen. The top and
bottom are cut off to remove most of the source material’s
black bars. This mode is good for programs or movies with
sub-titles.
Panoramic Mode
When watching a standard broadcast or full frame movie in
this mode, the 4:3 Aspect Ratio (1.33:1 source) display image
is stretched horizontally on the left and right sides to fill the
TV screen. The center of the image is not stretched.
Stretch Mode
When watching a widescreen program (1.78:1 source) with black
bars on the sides, the display image will stretch to fill the TV
screen. People will appear wider than they really are. If you are
watching a widescreen (1.85:1 or 2.35:1 source) program or
movie, there will still be black bars at the top and bottom. This
mode is available only when watching a widescreen program.