Filter
Top Products
7
Getting started
Preparation
GB
Check that you have all of the following items. If any items are missing,
call the PlayStation
®2 service line at the number listed on your warranty
card for assistance.
Removing the 3-pin converting adaptor (SCPH-70006 only)
Electrical outlet configuration may vary depending on the region of use. If
the plug on the supplied AC power cord does not match the electrical
outlet, loosen the screw and remove the converting adaptor.
You can place the console in either the horizontal or vertical position.
Horizontal position
Set the console horizontally.
Vertical position
When setting the console in the vertical
position, use the SCPH-70110 vertical stand
(for PlayStation
®2) (sold separately).
Note
Some vertical stands (for PlayStation®2) cannot be used with this model of the
PlayStation®2 console ( page 45). Choose the SCPH-70110 when purchasing a
vertical stand.
Preparation
Getting started
Checking the package contents
s PlayStation®2 console...1 s Analog controller
(DUALSHOCK
®2)...1
s AC adaptor...1
s AC power cord (supplied with
SCPH-70007)...1
s AC power cord (with 3-pin
converting adaptor attached)
(supplied with SCPH-70006)...1
s AV cable (integrated
audio/video)...1
s Instruction manual...1
Note
You first need to remove the protective tape before
using the console.
Protective tape
Positioning the console
Mains power plug
3-pin converting adaptor