Filter
Top Products
10
EN
Vibration function
This Analog Controller (DUAL SHOCK) is a
touch sensitive controller with a vibration
function. The vibration function can be set to
ON or OFF on the monitor with the software.
The function of each button may vary
depending on the software played. Refer to
individual software instruction manuals for
further details.
Notes
• When the Analog Controller (DUAL SHOCK) is not
used, turn the "PlayStation" off or unplug the controller
from the "PlayStation".
• Before using the vibration function of this controller,
please read the following notes on safety.
For safety
• Stop using this unit immediately if you become
tired or if you experience unpleasantness or pain in
your hands or arms while using. If the condition
persists, consult your doctor.
• Do not attempt to operate the controller with
anything other than your hands. Do not operate the
controller with, or attach it to; your head, elbows,
other bony parts of your body, face, or stomach.
• Absolutely do not use the vibration function of the
Analog Controller (DUAL SHOCK) if you have any
ailment in the bones or joints of your hands or
arms.
• Absolutely do not use the vibration function of the
Analog Controller (DUAL SHOCK) when your
fingers, hands, wrists, or arms are broken,
dislocated, or sprained; or if you have a pulled
muscle. These ailments may become worse due to
the vibration of the controller.
• Do not continue to use the Analog Controller
(DUAL SHOCK) for a long time. Take a rest at
about 30 minute intervals.
Analog Controller usage
A Mode switching and LED
display
This Analog Controller (DUAL SHOCK) can be
switched between two modes by pressing the
analog mode switch.
Each time the analog mode switch is pressed,
the mode changes as follows.
Digital mode (LED display : Off)
µ
Analog mode (LED display : Red)
Note
After checking the “ ” icon on the software,
switch to the appropriate mode for use.
Note however, that some software makes this adjustment
automatically. In such cases, the analog mode switch is
overridden by the software. For details, refer to the
software instruction manual.
B Digital mode (LED : Off)
You can use this controller in the same manner
as SCPH-1080 controller.
C Analog mode (LED : Red)
Supports software with icon.
Before using the controller, rotate the sticks
once with your thumbs as if drawing a circle, as
shown in the diagram at left. Do not twist the
sticks (D).
AB
C
LED
L1 button
Touche L1
L1 botón
L2 button
Touche L2
L2 botón
R2 button
Touche R2
R2 botón
D
R2 button
Touche R2
R2 botón
¢ button
Touche ¢
¢ botón
✕ button
Touche ✕
✕ botón
START button
Touche START
Botón START (COMIENZO)
LED:Off
Arrêt
Apagado
Directional buttons
Touches directionnelles
Botones de dirección
START button
Touche START
Botón START (COMIENZO)
SELECT button
Touche SELECT
Botón SELECT (SELECCIÓN)
π button
Touche π
π botón
® button
Touche ®
® botón
R1 button
Touche R1
R1 botón
* The R3 button and the L3 button function when the stick is pressed.
* La touche R3 et la touche L3 fonctionnent lorsque la manette est enfoncée.
* Los botones R3 y L3 funcionan al oprimir la palanca de mando.
SELECT button
Touche SELECT
Botón SELECT (SELECCIÓN)
L2 button
Touche L2
L2 botón
L1 button
Touche L1
L1 botón
Left stick / L3 button *
Joystick gauche / Touche L3 *
Palanca izquierda / L3 botón *
Analog mode switch
Interrupteur mode analogique
Interruptor para funcionamiento analógico
Right stick / R3 button *
Joystick droite / Touche R3 *
Palanca derecha / R3 botón *
LED:Red
Rouge
En rojo
π button
Touche π
π botón
✕ button
Touche ✕
✕ botón
® button
Touche ®
® botón
R1 button
Touche R1
R1 botón
¢ button
Touche ¢
¢ botón
Analog mode switch
Interrupteur mode analogique
Interruptor para funcionamiento
anal
ó
gico
Analog mode switch
Interrupteur mode analogique
Interruptor para funcionamiento anal
ó
gico
Directional buttons
Touches directionnelles
Botones de dirección