Filter
Top Products
DE
IT
NL
PT
Network
Adjusting network settings
4 Select "Scan", and then press the
right button.
When using a wireless access point that supports AOSS™,
select "Automatic", and then follow the on-screen instructions.
The setup will complete automatically. For information on
access points that support automatic setup, contact the
access point manufacturer.
AOSS™
Buffalo, Inc.
Creating a new network connection
You can adjust network settings to connect to an
access point and save the network connection data
on the system. Network settings may vary depending
on the equipment in use and the network
environment. The following instructions are based on
the most common network configuration and may not
apply to all installations.
1 Select (Network Settings) under
(Settings) from the Home Menu, and
then press the button.
2 Select "Infrastructure Mode", and then
press the button.
3 Select "New Connection", and then press
the button.
21