Filter
Top Products
19
GB
Network
Adjusting network settings
Creating a new network connection
You can adjust network settings to connect to an
access point and save the network connection data
on the system. Network settings may vary depending
on the equipment in use and the network environment.
The following instructions are based on the most
common network configuration and may not apply to
all installations.
1 Select (Network Settings) under
(Settings) from the Home Menu, and
then press the button.
2 Select “Infrastructure Mode”, and then
press the button.
3 Select “New Connection”, and then
press the button.
4 Select “Scan”, and then press the
right button.
Hint
When using an access point that supports automatic setup,
select “Automatic” and then follow the on-screen instructions to
automatically complete the necessary settings. For information
on access points that support automatic setup, contact the
access point manufacturer.