Filter
Top Products
12 | MB Pro1 | MB Pro 2
Putting the headset into operation
Pairing the headset with a Bluetooth device
The following chapter describes, by way of example of a mobile phone, how to
pair the headset with a Bluetooth device. In case of deviation, proceed as de-
scribed in the instruction manual of your mobile phone.
1. Switch the headset off (see page 14).
2. Keep the multi-function button pressed until the LED alternately flashes blue
and red.
The headset is in pairing mode.
3. Enable the Bluetooth visibility on your mobile phone.
4. Via the mobile phone‘s menu, start the search for new Bluetooth devices (see
the instruction manual of your mobile phone). All available devices in the
proximity of the mobile phone are displayed.
5. From the found Bluetooth devices, select “Sennheiser MB Pro 1” or “Sennheiser
MB Pro 2“ to pair the headset with the mobile phone. If necessary, enter the
default PIN code “0000”.
6. Once the headset is paired with the mobile phone, the LED goes off.
1
3
6
4
20 cm
Menu
Bluetooth on
Bluetooth o
”Pairing successful”
2
5
Sennheiser MB Pro 2
Presence
Sennheiser MB Pro 2
Keyword:
0000
Menu
Add device
2s
OFF
3x
6s
”Pairing“
If pairing is not successful within 5 minutes, the headset automatically returns to
connectable mode. Repeat the pairing procedure.