Filter
Top Products
6 Insert a top cradle bar into one of the shorter arms on the center crossbar.
7 Align the holes on the top cradle bar and crossbar, then insert a bolt
clip through the holes.
8 Repeat Steps 6 and 7 to attach the other top cradle bar.
9 Snap the top supports onto the cradle bars. Make sure that the
rounded clips on the supports are on top of the cradle bars.
10 Slide out the pole on the base bar until it locks into place.
11 Insert the base bar into the stand feet until it locks into place.
12 Place the turntable on the stand.
Speci cations
• Compatible with PlayStation®2, PlayStation®3, Xbox 360®, and Wii™
• Stand dimensions: 26.57 × 19.09 × 29.92 (low) / 35.83 (high) inches
(67.5 × 48.5 × 76 (low) / 91 (high) cm)
• Individual product weight: 7.34 lbs. (3.345 kg)
• Weight limit: approximately 15 lbs. (6.8 kg)
90-day limited warranty
Visit www.rocket shproducts.com for details.
© 2010 BBY Solutions, Inc. All rights reserved. ROCKETFISH is a trademark of
BBY Solutions, Inc. All other products and brand names are trademarks of their
respective owners.
ENGLISH 10-0798
Locked
CAUTION: This stand is intended only
for use with a DJ Hero™ turntable
accessory. Using the stand for other products
or objects, particularly those weighing more
than 15 pounds, may result in instability, which
may cause injury. When the turntable is on the
stand, do not lift the stand by the posts.