Filter
Top Products
10
Canceling the RY axis function
To cancel the RY axis function:
1 Press and hold SELECT and START for three seconds. The LED turns on.
2 Press the foot pedal assigned to the RY axis twice. The LED turns off and
the RY axis function is canceled.
Adjusting the sensitivity
To adjust the sensitivity:
1 Press and hold SELECT and START for three seconds. The LED turns on.
2 Press SELECT. The LED indicates the current sensitivity setting.
• LED solid—Medium sensitivity
• LED flashing quickly—High sensitivity
• LED flashing slowly—Low sensitivity
3 Press UP on the D-pad to save the setting.
Conserving power
The racing wheel has sleep mode and automatic off functions to
conserve power.
The racing wheel enters sleep mode if it is connected to the PS3
console and is not used for three minutes.
The racing wheel automatically turns off if it is not connected to the
PS3 console for four minutes.
To exit sleep mode or turn on the racing wheel:
• Press START. The racing wheel turns on and the LED lights.
Low battery warning
When the battery charge is getting low, the LED on the racing wheel
flashes. You need to replace the batteries.
Warning: Make sure that you insert the batteries correctly. If the batteries are inserted
incorrectly personal injury or damage to the racing wheel may occur.