React RTPS2696o Video Game Controller User Manual


 
Features
4
Looks and feels like a real guitar for the ultimate rock 'n' roll experience.
Advanced 2.4GHz wireless technology.
Auto scan mode and manual scan mode.
Power switch.
Uses 4 “AA” batteries(not included).
Working distance up-to 50 feet.
Adjustable strap makes playing comfortable.
Working Whammy Bar adds an extra touch of realism.
Five multicolored Fret Buttons and a responsive and durable Strum Bar
let you play along to the notes on the screen.
Diagrams
7
Front View
RX(Yellow LED)
Power(Green LED)
Connect Button
S
T
A
R
T
S
E
L
E
C
T
Start
Select
Strum Bar
Whammy Bar
Fret Buttons
Directions
5
Start Button: Start/Pause
Select Button: Select/Activates star power
Green Fret Button: Activates the green note/confirm
Red Fret Button: Activates the red note/cancel
Yellow Fret Button: Activates the yellow note
Blue Fret Button: Activates the blue note
Orange Fret Button: Activates the orange note
Strum Bar: Press the Strum Bar UP or DOWN to activate the Fret
Button(s) you have pressed. To navigate in menus press
the Strum Bar UP or DOWN.
Whammy Bar: Press in towards the guitar on long notes to alter the
sound of the song.
TILT Sensor: Tilt Wireless Guitar up to activate star power.
How to use the
Wireless Guitar
1-Auto scan mode:
2. Place 4 AA batteries into the
Wireless Guitar.
1. Remove the Whammy Bar Safety Tab by slowly pulling the small square
tab off of the Whammy Bar.
5. The Wireless Guitar will search for a signal and the receiver’s yellow
LED will illuminate when the connection has been made.
3. Plug the wireless receiver into the desired gameport.
4. Power on your console and the Wireless Guitar via the power switch.
Power Switch: Turn off after you finish playing.
6
Note: If Wireless Guitar does not find a connection, please repeat steps
1 - 4 again to ensure that your operation is right. If this does not work,
please check your video game console for other issues.
2-Manual scan mode:
If you are unable to get a connection with the wireless Guitar, you may
make the connection using the manual scan mode.
1. Press the CONNECT button on the receiver;
2. Immediately press CONNECT button on the Guitar backside.
This may take as long as 20 seconds.
Two Player Note: If using two wireless Guitars please connect the
1
st
Wireless Guitar and 1
st
wireless receiver before connecting the
2
nd
Guitar and receiver. Do not connect both units at the same time,
they must be connected and scanned separately.
Note: If the Wireless Guitar does not find a connection, please repeat
1 & 2 all over again to ensure that your operation is right. If this does not
work, please check your video game console for other issues.
The yellow LED will illuminate to indicate that the connection is a success.