Filter
Top Products
2
USING THE GAMEPAD
Cautions:
• Always turn off your computer before connecting or disconnecting the
gamepad from the game port.
• When disconnecting the gamepad from the computer, hold and gently
pull on the connector plug. Do not pull the cable.
1. Turn off the computer.
2. Insert the gamepad’s connector into game port A on your computer, then
turn on the computer.
3. If the game you want to play uses all eight of the gamepad’s buttons, set
OFF/NORMAL/TURBO
to
NORMAL
(for normal fire when you press a but-
ton) or to
TURBO
(for high-speed turbo fire when you hold down a button).
Otherwise, set
OFF/TURBO/AUTO
to
OFF
to use only the buttons marked
A
,
B
,
C
, and
D
on your gamepad.
4. Install the driver (see “Installing The Supplied Driver” on Page 3), config-
ure the gamepad (see “Configuring the Gamepad” on Page 3), then load
the game software according to the game's owner's manual.
Note:
Depending on the game you are playing, turbo fire might work dif-
ferently. Try each game with and without it to determine what works best.
L2
R2
OFF/NORMAL/TURBO
L1
R1
Thumb-Control Pad
D
C
A
B
26-445.fm Page 2 Thursday, June 3, 1999 9:57 AM