Philips MC235 Video Game Sound System User Manual


 
English
3140 115 xxxxx
11
Basic Functions
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Switching the system on
Press STANDBY-ON / 2.
The system will switch to the last selected
source.
Press SOURCE (or CD, TUNER or AUX on
the remote control).
The system will switch to the selected source.
Press OPEN • CLOSEç.
Switch the system to ECO
Power Standby mode
Press STANDBY-ON / 2.
"ECO PWR" will be displayed, then the display
screen will go blank.
The ECO POWER LED will be lighted.
Note:
–To view clock time in standby mode. Press and
hold STANDBY-ON for more than 3 seconds, the
clock time is displayed dimly.
The Eco Power indicator goes off.
The volume level (up to a maximum volume
level of 20), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
Power Saving Automatic Standby
As a power-saving feature, the system
automatically switches to Eco Power/ Standby 15
minutes after a CD has reached the end and no
control is operated.
Adjusting volume and sound
1 Press the VOLUME 3 / 4 (+/-) control to
decrease or increase the volume.
Display shows the volume level VOL and a
number from MIN1, 2, ...30, 31 MAX.
2 Press DSC repeatedly to select the desired
sound effect: ROCK/ JAZZ/ POP/ CLASSIC.
3 Press DBB to switch bass enhancement on or
off.
Display shows: DBB.
4 Press MUTE on the remote control to
interrupt sound reproduction instantly.
Playback will continue without sound and the
display shows MUTE.
To activate sound reproduction you can:
press MUTE again;
adjust the volume controls;
change source.