Panasonic E8RS Video Gaming Accessories User Manual


 
20
F
P W
e
b-S
e
rv
e
r
Programme/Operate the FP0
Using a LAN or WAN Network
The multifunctional FP Web-Server provides users with the option of connecting the FP0 or any other
FP Series PLC to the Internet/Intranet thus enabling bi-directional communication. No changes to the PLC
programs are necessary. Simply assign an IP address to the FP Web-Server and connect the PLC to the
FP Web-Server via the serial RS232C interface. A standard browser e.g. MS Internet Explorer or Netscape
Navigator can be used for access at the PC.
The FP Web-Server´s 3 interfaces
10BaseT (RJ45, twisted pair)
– connects to the Ethernet at 10 Mbit/s
RS232C (screw terminal)
– connects to the FPΣ (Sigma) at 1200 to 115.2 kbit/s
RS232C (SUB-D 9 male)
– connects to a modem (PPP)
H
i
gh
li
gh
t
s
Web-Server:
-PLC data represented as HTML (or XML) pages
-Access via standard Internet browser
-PLC data handling via HTML and Java Applet
-Optional: Password protection, IP-Lok security
RS232C device server:
-Ethernet <–> RS232C conversion (MEWTOCOL)
-Transparent RS232C data tunneling via Ethernet
-Programming and visualisation via TCP or UDP
Modbus- TCP protocol:
- Communication via standard industrial Ethernet
protocol (server and client)
Email:
-PLC can send emails
-Email via LAN email server or Internet dial-up
-PLC-defined or pre-stored mail text
-PLC data array as attachment to an email
Modem/Ethernet gateway:
-FP Web-Server can be dialed up via modem
- One remote gateway for multiple FP Web-Servers in
a local Ethernet network
Network time server synchronisation:
-PLC real-time clock update via NTP server
Protocols TCP/IP, UDP/IP, SMTP, PPP, NTP, FTP, TELNET, HTTP, MEWTOCOL-COM
Number of browsers Up to 64 browsers can be connected to one FP Web-Server
4 predefined in FP Web Flash memory
1 programmable in PLC DT memory as ASCII
4 predefined in FP Web flash memory, 1000 addresses in PLC DT memory,
assuming an average of 32 characters are used per email address and that an
FP0-T32CP is used, which has 16k word memory
Two PLCs can be connected
3-pin port (port number: 9094)
DB8 port (port number: 9095)
IP address
DHCP or manually set by software
Security Password and DIP switch
Operating power 24VDC, 75mA (max.)
Dimensions 25 x 90 x 60mm (W x H x D)
LEDs Power, COM Ethernet connection, COM data exchange
Flash memory 512KBytes
Standards fulfilled CE, UL, cUL
Number of emails
Number of email addresses
Number of PLC per unit
Part number
FPWEBD
FPWEBTOOL2D Configurator Software
07/2007