Filter
Top Products
9
F
P0 Commun
i
c
a
t
i
on
Easier Maintenance Than Ever Before
M
a
i
n
t
e
n
a
n
c
e
s
a
v
i
ng
■ Overwrite function in RUN mode
It is possible to overwrite a program while the FP0 is running, such as during program debugging and startup adjustments.
■ Backup battery unnecessary
The program memory uses EEPROM. The program and device contents can be stored without a backup battery, and even
programming for a machine builder is safe.
■ Password function
A password function can be set in order to change a program. Limited to people authorised to make programme changes,
protection can be guaranteed better than ever.
■ Input/output verification LED
Every unit is equipped with LED I/O indicators housed within a compact body. Input/output status can be verified
at a glance.
The terminal type can be plugged
straight in without resorting to
crimping (made by Phoenix Contact
Co.). Can handle wires from
0.3 to 1.25mm
2
.
MIL connectors can be used
with 16-point and 32-point
units. Due to the loose-wiring,
pressure contact type design,
wiring is easy without the need
for insulation. (MIL-C-83503)
Program memory uses EEPROM. In addition, programmes can be changed even in RUN mode!
S
i
mp
l
e
i
ns
t
a
ll
a
t
i
on
Comes with either terminal block or MIL connector, simplifying wiring.
Terminal block MIL connector
Compatible models
FP0-C10RS, C10CRS, C14RS, C14CRS, E8RS, E16RS, E32RS
Compatible models
FP0-C16T/C16P/C16CT/C16CP, C32T/C32P/C32CT/C32CP,
E16T/E16P, E32T/E32P, FP0T32CP/T32CT
07/2007