Filter
Top Products
Replacing the Nintendo DS Lite
Rechargeable Battery Pack
Using the Nintendo DS Lite Stylus (USG-004)
If the screens on your Nintendo DS Lite have visible smudges, fingerprints on them or are
contaminated with foreign material, they may not work properly and can become more damaged.
You can clean them by using a soft clean cloth such as a lens or eyeglass cleaning cloth.
If the Touch Screen still does not work after cleaning, please contact Nintendo Customer Service
on (03) 9730 9822 or visit www.nintendo.com.au/ds/clean/index.php.
If it becomes necessary to replace the rechargeable battery pack, use the following procedure.
This procedure should be performed by an adult. A replacement battery pack may only be
ordered from Nintendo Australia (refer to page 29 for contact details).
1. Always turn the power off and disconnect the AC Adapter before replacing the battery pack.
2. Using a precision screwdriver, loosen the screw on the Battery Cover (Illustration 4). Remove
the Battery Cover and retain. Always use an appropriate screwdriver for the screw. Using
the wrong screwdriver may damage the head of the screw and you will not be able to remove
the Battery Cover.
3. Use the protrusion on the edge of the battery pack to remove it from the DS
(Illustration 5).
4. Insert a new rechargeable battery pack into the DS. Make sure to orient the battery
correctly, as shown in illustration 6.
5. Replace the Battery Cover in its original position and carefully tighten the screw.
stylus.
manual_USG-AUS-3.qxd 07.8.8 3:13 PM Page 8