Multi-Tech Systems S000573A Manual

A SERVICE OF

next previous







UsingtheRouter’sWebInterface 11



Configuringthe DHCPserver

Configuringa DynamicHostConfigurationProtocol(DHCP)Server

YoucanconfigureyourroutertofunctionasaDHCPserverthatsuppliesnetworkconfigurationinformation—

suchasIPaddress,subnetmask,andbroadcastaddress—todevicesonthenetwork.

ToconfiguretheDHCPserver:

1. FromSetup,selectDHCPConfiguration.

2. TousetheDHCPfeature,checkEnabled.

3. TheSubnetfielddisplaysthesubnetaddress.

4. TheMaskfielddisplaysthenetwork'ssubnetmask.

5. IntheGatewayfield,typethegatewayaddress.ThedefaultGatewayaddressistheLANIPaddressof

therouter.

6. IntheDomainfield,ty

peyournetworkdomain,ifany.

7. IntheLeaseTimefield,typetheDHCPleasetime.Leasetimeissetindays,hours,andminutes.ALease

Timeof00‐00‐00isaninfiniteleasetime.

8. IntheLeaseRangeStartfieldandintheLeaseRangeEn

dfield,typetherangeofIPaddressestobe

assignedbyDHCP.

9. ClickSubmit.