Filter
Top Products
CUSTOMER SUPPORT 1-877-999-3732
Infrared Technology:
1. The 86 in 1 uses Infrared technology. To avoid
latency, always make sure the main gaming unit is
directly in front of where you are playing.
Trouble Shooting:
Problem: 86 in 1 will not power on?
Solution: Confirm batteries in the main gaming unit
are inserted correctly.
Solution: Batteries may be drained, so try replacing
the batteries with new ones.
Problem: 86 in 1 is not accurate and/or there is
latency when playing?
Solution: Confirm batteries in controller/receiver
pack are inserted correctly.
Solution: Batteries may be drained, so try replacing
the batteries with new ones.
dreamGEAR
®
P.O. Box 478
Torrance, CA 90508
www.dreamgear.net
Sleep Mode:
The 86 in 1 controller will go into sleep mode after 5
minutes of non-use. When the controller is in sleep
mode the TV screen will change colors and eventually
become solid black. To wake the controller, simply
turn the 86 in 1 controllers power switch off and
then on again and your ready to play.
note: when you power on the 86 in 1 controller the LED
will not turn on, this is normal. The LED only illuminates
when buttons are used on the controller.
note: to save battery life always switch the power
on the
controller and receiver to the off position when not in
use.
dreamGEAR
®
P.O. Box 478
Torrance, CA 90508
www.dreamgear.net
86 in 1
86 in 1
W
W
i r
i r
eless
eless