Filter
Top Products
FOR USE IN CAR OR TRUCK USING 12VOLT CLA (CAR LIGHTER ADAPTOR)
1. USA PLUG REMAINS IN STORED POSITION
2. Locate Car Lighter Adaptor. Plug pin connector to the bottom of the Charger.
3. Plug Car Lighter Plug into 12Volt Power out of the vehicle.
The TC1000 charger is designed to work with changeable battery plates to fit and charge various Li-Ion digital camera
and camcorder batteries. Each TC-1000 is packaged with battery plates, to fit the different battery models from the
same camera manufacturer.
CHOSING THE CORRECT BATTERY PLATE
1. Find the Plate labeled with the battery model for you camera.
(Battery plates are inscribed with the OEM battery # as well as the DigiPower battery #)
(The battery model can be found on the battery label, or check the camera instruction manual.)
2. Attach the battery plate by sliding it on to the Base Charger.
(Contacts on the Plate should slide towards the LED at the bottom of the charger)
3. Slide the battery on to the cradle matching the battery terminals with the Plate contacts.