6
4 Unpacking
To unpack the access point, follow these steps:
Step 1 Unpack and remove the access point and the accessory kit from the shipping box.
Step 2 Return any packing material to the shipping container and save it for future use.
Step 3 Verify that you have received the items listed below. If any item is missing or damaged, contact
your Cisco representative or reseller for instructions.
–
The access point
–
Mounting bracket (selected when you ordered the access point)
–
Adjustable ceiling-rail clip (selected when you ordered the access point)
5 Configurations
The 3700 series access point contains two simultaneous dual-band radios, the 2.4-GHz MIMO radio
and the 5-GHz 802.11ac MIMO radio. The 3700 series access point configurations are:
• AIR-CAP3702E-x-K9, AIR-AP3702E-UXK9—two 2.4-GHz/5-GHz dual-band radios, up to 4
external dual-band diopole antennas
• AIR-CAP3702I-x-K9, AIR-AP3702I-UXK9—two 2.4-GHz/5-GHz dual-band radios, with
integrated dual-band inverted-F antennas
For information on the regulatory domains, see “Regulatory Domains” section on page 7.
External Antennas
The 3702E model is configured with up to four external dual-band dipole antennas, and two 2.4-GHz/
5-GHz dual-band radios. The radio and antennas support frequency bands 2400–2500 MHz and
5180–5865 MHz through a common dual-band RF interface. Features of the external dual-band
dipole antennas are:
• Four RTNC antenna connectors on the top of the access point
• Four TX/RX antennas
These antennas are supported on the 3702E:
• AIR-ANT2524DB-R
• AIR-ANT2524DW-R