Filter
Top Products
10 How to assemble your monitor hardware
4. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
‘POWER IN’ on the rear of the monitor. Do not
connect the other end to a power outlet just yet.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on
the monitor.
Turn on the computer too, and follow the instructions
in Getting the most from your BenQ monitor on page
12 to install the monitor software.
To extend the service life of the product, we recommend
that you use your computer's power management function.