Filter
Top Products
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to
fulfill applicable standards for:
• Radio frequency emission when installed
according to the instructions and used in its
intended environment.
• Immunity to electrical and electromagnetic
phenomena when installed according to the
instructions and used in its intended
environment.
USA - This equipment has been tested using a
shielded network cable (STP) and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Europe - This digital equipment fulfills
the requirements for RF emission according to
the Class A limit of EN 55022 when DC powered.
NOTICE! This is a Class A product. In a domestic
environment this product may cause RF
interference, in which case the user may be
required to take adequate measures.
Europe - This digital equipment fulfills
the requirements for RF emission according to
the Class B limit of EN 55022 when PoE
powered.
This product fulfills the requirements for
immunity according to EN 55024 office and
commercial environments.
Canada - This Class A digital apparatus
complies with Canadian ICES-003 when DC
powered.
Canada - This Class B digital apparatus
complies with Canadian ICES-003 when PoE
powered.
Australia - This digital equipment fulfills the
requirements for RF emission according to the
Class A limit of AS/NZS CISPR 22 when DC
powered. NOTICE! This is a class A product. In a
domestic environment this product may cause
RF interference, in which case the user may be
required to take adequate measures.
Australia - This digital equipment fulfills the
requirements for RF emission according to the
Class B limit of AS/NZS CISPR 22 when PoE
powered.
Equipment Modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment
contains no user-serviceable components.
Unauthorized equipment changes or
modifications will invalidate all applicable
regulatory certifications and approvals.