Filter
Top Products
Cable Management Rings—AR8113A 3
How to install and remove caged nuts
To install a caged nut:
1. Insert the caged nut into the square hole by hooking one
side of the caged nut assembly through the far side of the
hole.
2. Place the caged nut tool (provided) on the other side of the
caged nut and pull to snap it into position.
To remove a caged nut:
1. Remove any attached screw.
2. Grasp the caged nut and squeeze the sides to release it from the square hole.
Warn
i
ng
Install the caged nut horizontally. Do not install the caged nut
vertically with the sides of the caged nut engaging the top and
bottom of the square hole.