Filter
Top Products
E4400-90363 3
ESG Family Signal Generators Agilent Technologies ESG Family Feature Releases
10/00 • Fully Coded (3GPP 3.2 3-00) W-CDMA
personality for user equipment
(downlink) and base station (uplink)
testing, Opt. 200 (initial release). Based
on the following 3GPP Technical
Specifications: 3G TS 25.101 V3.2.2
(2000-04) for user equipment testing and
3G TS 24.141 V3.1.0 (2000-03) for base
station testing.
• Added reverse link capability to the
Real-Time cdma2000 personality for
fully coded base station testing, Opt. 201
• Added signal-selection capability for
certain BNC output connectors to the
Real-Time cdma2000 personality,
Opt. 201
ESG-D “B” with Opt. UN8 Rev. C or better
(Baseband Fuzzy board E4400-60070 and
Flex DG board E4400-60154)
≥ B.03.60
• Enhanced Bluetooth capability,
Opt UND. Added sine frequency drift
impairment, AWGN, continuous PN9
sequence, and clock/gate signal for BER
testing.
Opt. UND Rev. A or better (Dual Arb board
E4400-60069 or E4400-60187)
9/00 • Changed Walsh code assignments for
reverse link channels to match
specifications, Opt. 101
• Changed reverse link Q long code
from 1 chip advance (relative to I
long code) to 1 chip delay, Opt. 101
• Correctly display the power when
PSCH and SSCH channels are on at
the same time, Opt. 100
• Removed 307200 rate for RC3 suppl 1
and suppl 2 traffic channels, Opt. 101
• Replaced a suppl 1 traffic channel in
reverse link 5 setup with a suppl 2
traffic channel, Opt. 101
• Changed cdma2000 spread rate
default to SR1, Opt. 101
Opt. UND Rev. A or better (Dual Arb board
E4400-60069 or E4400-60187)
≥ B.03.51
7/00 • Improved ACP, Opt. H99 (Revision B) ESG-D/DP “B” with Opt. H99 (Revision B)
or better (A9 Output Board, E4400-60188)
≥ B.03.50
Release
Date
Feature Minimum Hardware Required
Firmware
Required