INSTALLATION 5
MAN0047 (9/15/00)
SUB-FRAME INSTALLATION Cont’d
Install Front Support
1. Remove cap screw (4) and hose holder (5) from
bottom of tractor chassis.
2. Install front hanger (1) to bottom of tractor chas-
sis and secure using four cap screws (2) and flat
washers (3) as shown in Figure 3.
3. Install cap screw (4), hose holder (5) and hex
lock nut (6) to left front corner of front support.
1. 1001383 Front Support
2. 33125 M14 x 2.0P x 50mm Cap screw
3. 46070 9/16 Flat washer, hardened
4. -------- M14 x 2.0P Cap screw (Tractor)
5. -------- Hose holder (Tractor)
6. 307825 M14 x 2.0P Hex nut
Figure 3 Front Support Installed
Figure 4 Front Support Installation
2
3
1
4
5
6
Forward
1
2
3
6
