20 Parts
29931 (Rev. 6/29/2007)
L306 CASTERS
REF PART QTY DESCRIPTION
A 24095 - L306 Caster assembly bundle
1 13400 1 Caster assembly
2 15638 1 10" Caster wheel with sleeve
3 23857 1 Caster wheel yoke assembly
4 13435 1 Caster arm assembly
5 13444 1 Left caster adjustment bracket
6 13444 1 Right caster adjustment bracket
7 1972 * 1 1/7 - 28 Straight thread grease fit-
ting, 15/32" L
8 21020 1 1/4 x 1-1/4 Spirol pin -or-
8 1285 * 1 1/4 x 1-1/2 Cotter pin
9 ----- * 1 Straight 1/4 self-tapping grease fit-
ting (for steel wheel) -or-
9 195 * 1 Straight 1/8P thread grease fitting
(for polyethylene wheel)
10 976 * 1 3/8 NC x 1-1/2 HHCS GR5
11 838 * 1 3/8 Standard lock washer
12 835 * 1 3/8 NC Hex nut, plated
13 11900 3 1/2 NC Flanged hex lock nut
14 24576 2 1/2 NC x 1-3/4 HHCS GR5
15 23479 1 1/2 NC x 5 HHCS GR5
16 29368 (c) 1 1/2 x 3/4 OD x 3-3/8 Sleeve, HT
-or-
16 12242 (c) 1 17 GA Wall x 5/8 OD x 3-3/8 tube
17 29375 (b) 2 3/4 Bore flanged bearing for 1-1/8
hole -or-
17 4228 (b) 2 5/8 Bore flanged bearing for 1-3/8
hole -or-
17 2905 (b) 2 5/8 Bore flanged bearing for 1-1/8
hole -or-
17 65578 (b) 2 3/4 Bore x 1.385 flanged wheel
bearing with groove
* Standard hardware, obtain locally
a For proper caster arm identification, refer to dimension
“L” as shown on drawing. The caster arms may be
used on either side to obtain best fit.
b Measure old bearing.
c Measure outside diameter of old sleeve.
