10 Hydraulic Installation
MAN0064 (Rev. 7/20/2007)
59723 Hose Kit
Route Hydraulic Hoses
Route hoses along loader mount, under the right side
of the operator’s platform, and over the rear axle.
Be sure to avoid contact with 3-point linkage, brake
pedals, and other moveable tractor components.
Hoses must be routed so they are not pinched, bent
sharply, or chafed during operation. Hoses must not
interfere with any tractor control operation or contact
any moving parts.
Connect hydraulic hoses to tractor hydraulic couplers
as shown in Figure 9 when loader is attached to trac-
tor.
Figure 9. Hydraulic Hose Connection to Tractor
Install Hose Hanger
1. Install hose hanger bracket beneath right side of
the operator’s platform as shown in Figure 10.
Use cap screw, flat washers, and lock nut as
shown in Figure 11.
2. Route hoses through support and secure with
lock pin (15).
11. 58033 Hose hanger bracket
12. 6778 5/16 NC Lock nut
13. 4378 5/16 Flat washer
14. 6250 5/16 NC x 1-1/4 HHCS
15. 58047 1/4 x 2-1/2 Lock pin
Figure 10. Hose Hanger Installed
Figure 11. Hose Hanger Assembly
/()7 6,'(
+<'5$8/,&
&21752/
&
'
%
$
5,*+7 6,'(
+<'5$8/,&
&21752/
